elektr0n

retropizero

sschueller — 2017-12-09T18:46:08+00:00

sudo modprobe fbtft_device name=fb_ssd1351 con2fbmap 1 1 options fbtft_device name=fb_ssd1351 gpios=reset:24,dc:25 speed=20000000 custom=1 fps=33 txbuflen=32768 spi-bcm2835 fbtft_device libcomposite # Enable audio (loads snd_bcm2835) dtparam=audio=on dtparam=spi=on display_rotate=3 dtoverlay=dwc2

start

sschueller — 2017-12-09T16:13:34+00:00

Random Stuff Electronics * Replace Panasonic ES-LV61 Battery * Replace factory q-see qs2350c power supply * Fix the h07/ho7 error on your panasonic dvd player * Game Boy Zero Asterisk Stuff * Asterisk Translator Computer stuff * Cisco 7970 Tricks * Nokia VoIP and Asterisk * Water cooled PC 3D Printing * Anycubic Kossel Plus * FFmpeg to youtube Other * Batman Tumbler Specifications * letsencrypt.sh * retropizero

ffmpeg_to_youtube

sschueller — 2017-07-23T19:34:30+00:00

FFMPEG Get Data from OctoPrint #!/bin/bash DATA=$(curl -s --header "X-Api-Key: xxx" http://localhost/api/printer) DATA2=$(curl -s --header "X-Api-Key: xxx" http://localhost/api/job) TOOTEMP=$(echo $DATA | jq -r '.temperature.tool0.actual') TOOREQTEMP=$(echo $DATA | jq -r '.temperature.tool0.target') BEDTEMP=$(echo $DATA | jq -r '.temperature.bed.actual') BEDREQTEMP=$(echo $DATA | jq -r '.temperature.bed.target') PROGRES=$(echo $DATA2 | jq -r '.progress.completion') TIMELEFT=$(echo $DATA2 |…

inductive_probe

sschueller — 2017-06-23T14:25:29+00:00

Inductive Probe Setup Hardware * Print Mounting bracket such as: * I am using the following probe: * If your probe support running on 5V. Connect it directly to Z-Min. Brown = +, Black = -, Blue = Signal * Mount the probe a bit higher than the nozzle so it will not hit printer stuff but make sure it is still close enough to…

anycubic_kossel_plus

sschueller — 2017-06-23T12:31:42+00:00

Anycubic Kossel Plus * BL Touch * Inductive Probe

bl_touch - created

sschueller — 2017-06-23T12:31:18+00:00

Anycubic Kossel Plus BL / 3D Touch Setup Hardware * Print bracket such as: * Connect White/Black wire to z-min-endstop (S = (signal - white), - = (minus - black)). Orientation doesn't matter * Connect Brown/Red/Orange wire to servo 0 port (S = Orange, + = Red, - = Brown) NOTE: on the Tri Gorila Board + and - are reversed.

ffmpeg - created

sschueller — 2017-05-22T11:03:35+00:00

Live streaming to youtube * compile ffmpeg with hardware encoder cd /usr/src git clone https://git.ffmpeg.org/ffmpeg.git cd ffmpeg ./configure --enable-omx --enable-omx-rpi --enable-libfreetype make make install Scripts #!/bin/bash KEY=******** URL=rtmp://a.rtmp.youtube.com/live2 while true ; do ffmpeg \ -ar 44100 -ac 2 -f s16le -i /dev/zero \ -thread_queue_size 512 \ -i /dev/video0 -f flv \ -framerate 30 -video_size 720x404 \ -vcodec h264_omx -maxrate 768k -bufsize 8080k \ -vf drawt…

20170513_152037.jpg - created

sschueller — 2017-05-14T15:47:47+00:00

20170513_164053.jpg - created

sschueller — 2017-05-14T15:45:55+00:00

dsc_0689.jpg - created

sschueller — 2016-08-24T08:47:25+00:00

img_20160806_141048.jpg - created

sschueller — 2016-08-24T08:38:16+00:00

img_20160618_161358.jpg - created

sschueller — 2016-06-18T17:10:14+00:00

img_20160618_175317.jpg - created

sschueller — 2016-06-18T17:08:32+00:00

img_20160618_164650.jpg - created

sschueller — 2016-06-18T17:08:29+00:00

img_20160618_164652.jpg - created

sschueller — 2016-06-18T17:08:29+00:00

akku_panasonic-liion_640mah_es8161.jpg - created

sschueller — 2015-05-24T14:22:18+00:00

20150524_153024.jpg - created

sschueller — 2015-05-24T14:14:47+00:00

20150524_152724.jpg - created

sschueller — 2015-05-24T14:14:47+00:00

20150524_153123.jpg - created

sschueller — 2015-05-24T14:14:45+00:00

20150524_152908.jpg - created

sschueller — 2015-05-24T14:14:42+00:00