This is an old revision of the document!

---

<code bash> sudo modprobe fbtft_device name=fb_ssd1351 con2fbmap 1 1 </code> <code bash /etc/modprobe.d/fbtft.conf> options fbtft_device name=fb_ssd1351 gpios=reset:24,dc:25 speed=20000000 custom=1 fps=33 txbuflen=32768 </code> <code bash /etc/modules-load.d/modules.conf> spi-bcm2835 fbtft_device libcomposite </code> <code bash /boot/config.txt> # Enable audio (loads snd_bcm2835) dtparam=audio=on dtparam=spi=on display_rotate=3 #dtoverlay=yeold-overlay dtoverlay=dwc2 </code> cat /dev/urandom > /dev/fb1 cd git clone https://github.com/tasanakorn/rpi-fbcp cd rpi-fbcp mkdir build cd build cmake .. make fbcp & sudo nano /etc/rc.local /home/pi/rbi-fbcp/build/fbcp &