This is an old revision of the document!
A PCRE internal error occured. This might be caused by a faulty plugin
====== Anycubic Kossel Plus ====== ===== BL / 3D Touch Setup ===== ==== Hardware ==== - Print bracket such as: http://www.thingiverse.com/thing:2251115 - Connect White/Black wire to z-min-endstop (S = (signal - white), - = (minus - black)). Orientation doesn't matter - Connect Brown/Red/Orange wire to servo 0 port (S = Orange, + = Red, - = Brown) NOTE: on the Tri Gorila Board + and - are reversed. {{::20170513_152037.jpg?direct&300|}}{{::20170513_164053.jpg?direct&300|}} ==== Software (Marlin) ====